Safety Device

Description

Safety Device

Some suppliers will sell safety device in parts but this can be dangerous, therefore we only sell the complete unit.

Compatible with all Alke Gas Brooders:

• Global 5
• Global 10
• AP2 
• Type 41
• Type 81

The gas safety device and electric components can handle a maximum temperature of 60 degrees Celsius. As a result, be sure that the heater is not mounted in such a way that this temperature will be reached (e.g. by other heaters in close vicinity).

Take a look at our YouTube Alke playlist for tips and maintenance videos.

Full user manuals available:

• For Global 5/10
• For Alke AP2
• Alke Type 41 & 81

Troubleshooting problems that might involve the safety device:

Burner extinguishes after lighting? 

• Keep button pressed for a longer period (up till 25 seconds)
• Check the position of the thermocouple (see above)
• Check if the thermocouple nut is connected properly to the device and to the EID2G unit and that the nuts are not loose.
• Check if the thermocouple has the proper depth in the burner, measured on the top plate (Global 5 = 25mm, Global 10 = 22 mm)
• Thermocouple switch in EID2G broken. Check (after switching 230V to the EID2G) by multimeter if resistance of the internal switch is <25 mΩ
• Thermocouple or magnetic coil of the safety device is broken
• Gas pressure lower than minimum requested
• Heater not suspended at 15 degrees angle

In conclusion trust in this Alke product, manufactured with precision to ensure the safety of your brooder/heaters set up.

Manufactured by Alke Heating Technology